Knowledgebase: Freedom i-Connex Mini Keypad
|
Connecting an i-Connex Mini to a Samsung Galaxy S/Tab (and other Android devices which have built in HID support)
Posted by Daniel Harper on 10 February 2011 12:48 PM
|
|
|
Below are some instructions on how to connect a Samsung Galaxy S/Tab (and other Android devices which have built in HID support). to an i-Connex Mini Paring the keyboard. 1) Turn the keyboard on and press the pairing button down for 5 seconds. The pairing button is situated above the 9 key. 2) On your Android Device, go to “Settings". Then from the settings screen select “Wireless and network”. 3) Now select “Bluetooth Settings”. Once your device finds the keyboard select “Freedom i-Connex Mini Keyboard” from the list. 4) Your device will now give you a 6 digit passkey. Enter this key onto the Freedom i-Connex Mini and press enter to complete the pairing (also on the Freedom i-Connex Mini). Please note that on some Android devices such as the Dell Steak and the Droid X, it will give you a passkey such as 1234 or 0000. Type this passkey on the phone and then press OK. Then when it is trying to pair, type the same passkey on the i-Connex Mini and then press enter (also on the i-Connex Mini). 5) Now your Freedom i-Connex Mini keypad will be connected. From this point forward you just need to switch the Freedom i-Connex Mini on and off when you need it. It will automatically reconnect when switched on. | |
 (397 votes) This article was helpful This article was not helpful |
|
Comments (0)